Glove Mixing Process Optimization of Gammex Powder Free Product to Overcome Scum Formation

Simple item page
dc.contributor.authorDissanayake, R.M.T.
dc.date.accessioned2021-10-25T10:55:50Z
dc.date.available2021-10-25T10:55:50Z
dc.date.issued2014
dc.description.abstractHevea brasiliensis latex is used to manufacture surgical gloves. Gammex Powder Free gloves are low in residual proteins and powder. Hence they are less susceptible to allergies. Scum formation is a major drawback in compounding process which contains of two major phases, phase 1 (heat prevulcanization) and phase 2(ambient prevulcanization). The major issue of the current process is scum formation during prevulcanization stage. The main reason for scum formation is the lack of stability at elevated temperature, high dosage of ZnO which forms excessive zinc amine complexes and due to less Brownian motion of curing agents. The trials were done by changing 3 main factors such as Potassium Laurate (PL) level, ZnO % and mode of introducing cure pack. As per the trials, changed PL dosage as 50 % in each phases, interchanged ZnO dosage in phase 1(lower dosage) & phase 2(higher dosage), individual dispersions of curing agents were introduced. Anyhow, ZnO trial was failed due to lack of ZnO for the activation of prevulcanization process. According to the statistical analysis using Minitab 16 software, the P value (<0.65) at 0.05 level of significance proved that there was an interaction between PL level and curing method. With 4.: the PL 50% in both phases and adding individual dispersions, the scum level was reduced from 8% to 0.5%. Gloves were prepared to test whether the chemical adjustment was affected for final glove quality. The modulus, Tensile Strength was more than required and it is cost effective. In conclusion, the scum formation can overcome by changing PL level and by adding individual dispersions. Furthermore, it is beneficial to overcome glove defects like scum, dirt hole and it allows opportunity for the process optimization of GPF product. Key words: Scum, Potassium Laurate, ZnO, Individual dispersionsen_US
dc.identifier.otherUWU/PLT/14/0015
dc.identifier.urihttp://www.erepo.lib.uwu.ac.lk/bitstream/handle/123456789/7378/PLT%2014%20015-24022021091138.pdf?sequence=1&isAllowed=y
dc.language.isoenen_US
dc.publisherUva Wellassa University of Sri Lankaen_US
dc.relation.ispartofseries;UWU/PLT/14/0015
dc.subjectPalm and Latex Technology and Value Addition Degree Programme ( PLT)en_US
dc.titleGlove Mixing Process Optimization of Gammex Powder Free Product to Overcome Scum Formationen_US
dc.title.alternativeResearch Article – PLT 2014en_US
dc.typeThesisen_US
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
PLT 14 015-24022021091138.pdf
Size:
2.53 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Palm and Latex Technology and Value Addition Degree Programme ( PLT)