Effect of Blowing Agent Types and Blowing Agent Loading Levels on Properties of Nr Cellular Composite

Simple item page
dc.contributor.authorWickramaachchi, W.P.P.T.
dc.date.accessioned2021-10-27T07:38:51Z
dc.date.available2021-10-27T07:38:51Z
dc.date.issued2015
dc.description.abstractIn this study the influences of chemical blowing agent types and blowing agent loading levels on cure characteristics, physio-mechanical and morphological properties of natural cellular rubber was investigated. The blowing agents used were NaHCO3 (sodium bicarbonate), DNPT (Dinitrosopentamethylene tetramine) and isopropanol. The cellular rubber samples were prepared using conventional compression molding technique via a heat transfer foaming process. When considering the cure behavior, it was found that maximum torque, scorch time and cure time tend to decrease with the increase in the blowing agent loading levels for all three blowing agent types. As a result, the cellular rubber with large cell size and non-uniform cell distribution was observed. The coalescence between bubbles was observed in the specimen with 1 Ophr of all three blowing agents owing to high gas content in the rubber matrix. Mechanical properties of the cellular rubber in terms of relative density, water absorption, compression set, cross link density and tensile strength were gradually decreased upon increasing the blowing agent loading levels. Key word: Cellular rubber, Chemical blowing agents, compression set, DNPT, Isopropanol, NaHCO3, physical properties, relative density and tensile strengthen_US
dc.identifier.otherUWU/PLT/15/0027
dc.identifier.urihttp://www.erepo.lib.uwu.ac.lk/bitstream/handle/123456789/7425/PLT%2015%20027-08102021092716.pdf?sequence=1&isAllowed=y
dc.language.isoenen_US
dc.publisherUva Wellassa University of Sri Lankaen_US
dc.relation.ispartofseries;UWU/PLT/15/0027
dc.subjectPalm and Latex Technology and Value Addition Degree Programme ( PLT)en_US
dc.titleEffect of Blowing Agent Types and Blowing Agent Loading Levels on Properties of Nr Cellular Compositeen_US
dc.title.alternativeResearch Article – PLT 2015en_US
dc.typeThesisen_US
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
PLT 15 027-08102021092716.pdf
Size:
935.69 KB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Palm and Latex Technology and Value Addition Degree Programme ( PLT)