Study of Mechanical and Physical Properties of Nitrile Butadiene Rubber Glove with Sulfur, Accelerator and Particle Size of the Dispersion

Simple item page
dc.contributor.authorMendis, E.D.M.
dc.date.accessioned2021-10-27T06:27:20Z
dc.date.available2021-10-27T06:27:20Z
dc.date.issued2015
dc.description.abstractSludge formation in the latex dipping tanks is the most destructive matter in the glove industry. This problem can cause quality defects of the glove and hence, high cost of production. This study was carried out to reduce the sludge quantity while improving the physical properties of the nitrile butadiene rubber glove by reducing the particle size of the dispersion. Particle size of the dispersion was reduced by increasing milling cycles in the pearl mill. Two milling cycles were considered in this study. Particle sizes of two samples were 2.51iln and 1µm according to the Dynamic Light Scattering test. Those dispersion samples were used to prepare compounds to measure the sludge quantity and gloves were prepared to investigate the physical properties. Particle size with the milling cycles were studied as a preliminary study. Further improvements of the physical properties of the glove were investigated using different sulfur/accelerator ratios in three sulfur vulcanizing systems. Two levels of sulfur/accelerator ratios in each system were used to determine a best ratio with better properties. Dispersion with 1 pm particle size was given least sludge quantity than the dispersion with 2.51.1m particle size while improving the properties. 3.5/1 sulfur/accelerator ratio was given better properties than the 2.5/0.5, 0.4/0.5, 0.8/3, 1/1, 1.5/1.5 ratios. Standard property levels in nitrile butadiene glove were considered as the control in this study. 1µm dispersion was given least sludge quantity with considerable improvement in physical properties. 3.5/1 ratio was given better properties than the 2.5/0.5, 0.4/0.5, 0.8/3, 1/1, 1.5/1.5 ratios. This is because vulcanizate with high promotion of polysulfidic bonds obtained high mechanical strength. Therefore, it is effective to use dispersions made from l[tm particle size with 3.5/1 sulfur/ accelerator ratio in the production of nitrile glove. Keywords: particle size, physical properties, sludge, sulfur/accelerator ratioen_US
dc.identifier.otherUWU/PLT/15/0015
dc.identifier.urihttp://www.erepo.lib.uwu.ac.lk/bitstream/handle/123456789/7417/PLT%2015%20015-08102021094801.pdf?sequence=1&isAllowed=y
dc.language.isoenen_US
dc.publisherUva Wellassa University of Sri Lankaen_US
dc.relation.ispartofseries;UWU/PLT/15/0015
dc.subjectPalm and Latex Technology and Value Addition Degree Programme ( PLT)en_US
dc.titleStudy of Mechanical and Physical Properties of Nitrile Butadiene Rubber Glove with Sulfur, Accelerator and Particle Size of the Dispersionen_US
dc.title.alternativeResearch Article – PLT 2015en_US
dc.typeThesisen_US
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
PLT 15 015-08102021094801.pdf
Size:
1.13 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Palm and Latex Technology and Value Addition Degree Programme ( PLT)