Effect of 4-tertbutyl pyridine and guanidinium thiocyanate Co-Additives on Performance of Dye-Sensitized Solar Cells Fabricated with Non-Volatile Liquid Electrolyte

dc.contributor.authorUmair, K.
dc.contributor.authorDissanayake, M.A.K.L.
dc.contributor.authorSenadeera, G.K.R.
dc.contributor.authorKumari, J.M.K.W.
dc.date.accessioned2022-10-06T07:25:27Z
dc.date.available2022-10-06T07:25:27Z
dc.date.issued2021
dc.description.abstractDye-sensitized solar cells (DSSCs) are emerging as potential candidates to substitute for expensive silicon solar cells because of reasonably high efficiency, easy fabrication method, lower production cost and transparency. Electrolyte modifications of DSSC are an easy way to enhance the photovoltaic performance. The conventional liquid electrolyte system is composed of iodide/triiodide single salt in the volatile, acetonitrile solvent. In this work, the non-volatile ethylene carbonate (EC) and propylene carbonate (PC) were used with tetrapropyl ammonium iodide (Pr4NI) salt to prepare the reference electrolyte. The effect of the co- additives 4-tert butylpyridine (TBP) and Guanidinium thiocyanate (GuSCN) on the photovoltaic performance of DSSCs was also studied. The addition of TBP as an additive into the iodide electrolyte system increased the photovoltage (VOC) by 13.8%, but it reduced the photocurrent density (JSC) by 7.2%. However, the JSC was increased by about 8.7% by the addition of GuSCN as the additive. The addition of the combination of TBP and GuSCN binary additives in the optimized ratio of 65:35 enhanced the cell efficiency from 5.63% to 6.83%. The overall efficiency enhancement has been explained by the shifting of the conduction energy band edge of TiO2 due to the adsorption of species from the two co-additives by TiO2 leading to the enhancement of both, the photocurrent density as well as the photovoltage. TBP improves the VOC by a negative shift of the band-edge and also prevents the electron recombination to I3- due to the blocking effect on the dye-absent active site of the TiO2 surface. The addition of GuSCN to TBP-added electrolyte restored the JSC by the positive shift of the band-edge. The net effect is to increase the overall performance of DSSCs due to the synergistic effect of the two co-additives. Keywords: Photovoltaic effect; Co-additives; Band-edge shift; Non-volatile; VOC improveren_US
dc.identifier.isbn978-624-5856-04-6
dc.identifier.urihttp://www.erepo.lib.uwu.ac.lk/bitstream/handle/123456789/9755/Page%20319%20-%20IRCUWU2021%20-%20466%20-%20K.%20Umair%20-%20Effect%20of%204-tertbutyl%20pyridine%20and%20guanidinium%20thiocyanate%20Co%20Additives%20on%20Performance%20of.pdf?sequence=1&isAllowed=y
dc.language.isoenen_US
dc.publisherUva Wellassa University of Sri Lankaen_US
dc.subjectMineral Sciencesen_US
dc.subjectMaterials Sciencesen_US
dc.subjectSensitized Solar Cellen_US
dc.subjectElectronic Engineeringen_US
dc.titleEffect of 4-tertbutyl pyridine and guanidinium thiocyanate Co-Additives on Performance of Dye-Sensitized Solar Cells Fabricated with Non-Volatile Liquid Electrolyteen_US
dc.title.alternativeInternational Research Conference 2021en_US
dc.typeOtheren_US
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Page 319 - IRCUWU2021 - 466 - K. Umair - Effect of 4-tertbutyl pyridine and guanidinium thiocyanate Co Additives on Performance of.pdf
Size:
150.28 KB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: