Effect of Canopus 100 processing oil on the blooming effect of solid tyres
No Thumbnail Available
Date
2015
Journal Title
Journal ISSN
Volume Title
Publisher
Uva Wellassa University of Sri Lanka
Abstract
Solid tyres are popular in the industrial world. These types of tires are primarilyused for
industrial or light commercial applications such as light industrial and personal use vehicles
(Blanc et al., 1988).
Samson Rubber Products (Pvt) Ltd produces industrial solid tyres by using two rubber
compounds namely ST 1125 compound and ST 9048 compound. ST 1125 compound is used to
make the inner part of the tyre. ST 9048 compound is used to make the outer part of t he tyre.
Because, ST 9048 compound is more expensive than ST 1125 compound.
To obtain a good quality tyre, the rubber compound must be calendared on the day itself.
Calendering is done to have ancompound sheet of uniform thickness for easy maintenance of the
shape of the solid tyre. But, certain time period is needed to calendar the compounds. Sheets
cannot be kept more than 24 hours after calendaring. Because some yellowish marks may appear
on the surface of the solid tyres after manufacturing which is known as ‘blooming effect’. It
highly affects on the final quality of the solid tyre.
If the blooming effect can be overcome, the calendared sheets can be kept for certain period until
solid tyre manufacturing process is started without affecting the quality of the solid tyre. As a
result, the solid tyre manufacturing can be undertaken in a continuous mannar. Generally,
blooming effect is occurred during vulcanization after two days of calendaring the compounds.
During this period, it will move to the outer surface.
Previous research projects carried out on this topic were found that sulphur is not a root course of
the blooming effect. This yellow blooming may occurre due to the ingredients contained in ST
9048 compound. Generally, processing oil is added to improve the processability of the
compound. In solid tyre manufacturing, the processing oil called ‘Canopus 100’ is used which is
one of the highly refined paraffinic mineral oils. This research is an attempt to determine the
effect of Canopus 100 processing oil which is one of the ingredients contained in the ST 9048
compound on the blooming effect of solid tyres.
Methodology
Seven ST 9048 compound samples were prepared in various phr(Parts Per Hundred Rubber)
level of the Canopus 100. The phr level of the oil was varied in a range of 0phr to 3 phr (0 phr,
0.5 phr, 1.0 phr, 1.5 phr, 2.0 phr, 2.5 phr, 3.0 phr). Each treatment was tested in five replicates.
Completely randomized design was used as the experimental design. Response variable was the
area affected due to the blooming effect.
Then, compounds were calendared using the calendar machine to make the compounds as sheets
for easy maintenance and production. The required amount of the compounds were weighed
using the balance. The weight of the 1125 compound sample was 4.9kg and the weight of the
9048 compound sample was 2.3 kg. Those compounds were kept for two days before starting the
production. ST 1125 compound (4.9 kg) was wrapped around the rim. Then, the ST 9048
compound ( 2.3 kg) was wrapped on the wrapped ST 1125 compound.The prepared solid tyre
structure was inserted in to the press machine at a temperature of 130 C for 85 min.A
transparent grid paper was kept on the surface of the solid tyre. Then, the affected area was
determined by counting the number of grids.
Minitab was used to analyze the data. The method of data analysis was one way analysis of
variance (ANOVA). Mean comparison was done using Tukey test at 95% confidence interval.
Results and Discussion
According to the statistical analysis, the results obtained in this research can be described as
follows. According to the Table 1, there was a significant difference (p ≤ 0.05) among the
treatments. There was a significant difference among the area affected due to blooming effect in
treatment 4,3,6,1, and 7. But, there was no significant difference in treatment 5 and 2 in terms of
the area affected in due to blooming effect in solid tyres.
Description
Keywords
Agriculture, Export Agriculture, Industrial, Rubber Production, Rubber Technology